Pumps and Strainers

  • image8.jpeg

Pentair C-Series & EQ Series Pumps, Hayward HCP 4000, 3000, 2500, 2000, TriStar Full Rated Pumps, Booster Pump 300

Pentair C Series® Commercial Bronze Pump Bronze volute and pot, coated cast iron foot, flanged connections, 6 in. suction, 4 in. discharge and Hair and Lint Strainer

  • image9.png

Features

With and Without Hair and Lint Strainer

Bronze volute and pot, coated cast iron foot, flanged connections, 6 in. suction, 4 in. discharge

  • Large commercial pump with s/s basket
  • Easy serviceability
  • All-bronze construction for strength and durability
  • 6 in. suction and 4 in. discharge for maximum capabilities
  • Heavy-gauge stainless steel strainer basket with an open area 5 times the area of the suction port
  • Closed impeller for longer motor bearing life
  • Heat-resistant seal capable of operation at up to 150 degrees
  • Available in single and three-phase, 50 and 60-Hertz models

FOR TECHNICAL INFORMATION AND SPEC SHEETS, PLEASE VISIT THE LINK BELOW

  • image11.jpeg

Pentair EQ Series® Commercial Plastic Pump Plastic volute and pot, plastic foot, flanged connections, 6 in. suction, 4 in. discharge and Hair and Lint Strainer

Features

  • Close coupled for quiet, stable flow operation
  • Lightweight for easy, one-man installation
  • Clear Cam and Ramp™ Lid for added service convenience
  • 6" suction and 4" discharge with strainer pot
  • Closed impeller for long life and durability
  • Available in single and three phase models
  • Great for use with Eco-Flow-C Variable Frequency Drives
  • Self-priming under NSF standards; NSF listed

FOR TECHNICAL INFORMATION AND SPEC SHEETS, PLEASE VISIT THE LINK BELOW

  • image12.png
  • image14.jpeg

Hayward HCP Series pumps offer industry-leading versatility for every commercial pool.

HCP 4000 Series self-priming pumps provide an advanced alternative to traditional commercial pumps from 5.5 HP, 7.5 HP, 10.0 HP, 12.5 HP. Their lightweight rugged material allows for ease of installation, and it's TEFC motor ensures reliability.

FOR TECHNICAL INFORMATION AND SPEC SHEETS, PLEASE VISIT THE LINK BELOW

  • Image_15.jpg

HCP 3000 Series

HCP 3000 Series pumps are unmatched in performance and versatility, in the 3" class from 2.0 HP through 7.0 HP. The Series offers a variety of power and electrical options, which enable you to provide the right solution for a range of applications.

FOR TECHNICAL INFORMATION AND SPEC SHEETS, PLEASE VISIT THE LINK BELOW

  • HCP 2500 TriStar VS C Series.jpg

HCP 2500 TriStar VS C Series

HCP 2500 TriStar VS C Series is the most energy-efficient 2.7 HP commercial pool pump. Its advanced hydraulic design moves water more efficiently while operating at lower RPM’s - as a result, minimizing noise and saving up to 90% on energy costs.

FOR TECHNICAL INFORMATION AND SPEC SHEETS, PLEASE VISIT THE LINK BELOW

  • HCP 2500 TriStar VS C Series.jpg

HCP 2000 Series TriStar

HCP 2000 Series TriStar pumps, ranging from 0.5 HP to 5.0 HP, features the industry’s most energy efficient hydraulics with the 3 HP to 5 HP models. TriStar provides outstanding value and features a large easy to clean rib-less basket.

FOR TECHNICAL INFORMATION AND SPEC SHEETS, PLEASE VISIT THE LINK BELOW

  • image22-2.jpeg

Booster Pump 300

Booster Pump 300 is engineered to provide the same quiet operation and reduced electricity requirements as our standard Booster Pump and comes with a totally enclosed fan-cooled (TEFC) motor, inclusion of hose kit, and a 2-year extended warranty for increased peace of mind.

Booster Pump 300 has the ability to lower pressure cleaner-related electricity costs by as much as 35%, making it an energy efficient pool pump. Its simplistic design gives it a clear advantage over other pool pumps in the market while also allowing for effortless operation.

Features:

Permanent magnet, totally enclosed fan-cooled (TEFC) motor delivers maximum energy efficiency and reliability

  • Uses up to 35% less energy than other booster pumps, reducing pool operating costs
  • Engineered for quiet operation
  • Compatible with any pool cleaner that requires a booster pump
  • Packaged with a hose kit containing 1.5” union fittings, 0.75” hose barb union adapters and a flexible hose to make installation quick and easy
  • Comes with a 2-year extended warranty for increased peace of mind
image23.jpeg

Strainers-Mer-Maid

  • image25.png
  • image24.png

Fiberglass Pump Strainers for Swimming Pools, Aquariums, Waterparks and Fountain Applications

Swimming Pool Strainer Housings are fiberglass reinforced plastic construction, pressure tested to 50 PSI. Features include: isophthalic fiberglass resin, quick opening latches, see-through lid, 316 stainless steel v-wire basket with 3/16 square holes and 62% open area. Many alternate basket materials and opening types (perforations) are available. For seawater service (as opposed to pool water with salt added for chlorine generation or aquariums) we suggest duplex stainless steel (2205 alloy) or hastalloy. Strainers are supplied with flanged connections drilled to 150 lb. ANSI standard.

FOR TECHNICAL INFORMATION AND SPEC SHEETS, PLEASE VISIT THE LINKs BELOW

icons_iphone.png

Get a Better Pool Today

Call (480) 694-4709 and Learn How You Can Enhance Your Pool Experience

Contact Us